Hydraulic intensification

Thermal expansion and pressure intensification in hydraulic cylinders

If you were tuned in last month, you know about my lucky escape when a support tower snapped on the Blackcomb gondola. A great number of members sent their good wishes in response. So many in fact, it was not possible for me to reply to them all individually. And although it's largely inadequate, I'd like to acknowledge and thank those members here.

A few were quick to point out the failure wasn't anything to do with hydraulics. Actually it was. Not fluid power hydraulics. But the failure was hydraulic in nature.

The support pylon was a hollow cylinder or tube - designed to be hermetically sealed. But water leaked into the cylinder - and froze. The expansion in volume as the water froze created enough hydrostatic force to cause the tensile failure of a butt-weld joint - effectively jacking the top off the tower.

The fluid power hydraulics lesson to take away from this is very well summarized by one of our members who's used to working in freezing conditions:

"It seems that hydraulic principals and Mother Nature led to the failure of the tower. It definitely shows the raw power of a contained fluid under pressure in an enclosed cylinder and the effects of temperature on fluids.

We have seen a similar problem occur in our Snowcat fleet that happens when a tiller is brought in from the cold and removed. If the tiller is left in the warm shop and some hydraulic oil is not drained via the quick couplers, pressure rise caused by expansion of the warming fluid can ruin the motor seals, coupler seals and on a couple of occasions has split one of the motor cases."

Although not related to thermal expansion, another problem associated with contained fluid and which can arise in cold conditions is pressure intensification.

If the cap end of a double-acting hydraulic cylinder is pressurized and fluid cannot escape from the rod end - due to the oil being so cold it is below its pour point (or any other reason) this potentially dangerous phenomenon can result in catastrophic failure of the cylinder.

To demonstrate why pressure intensification can be so dangerous - and why we normally use meter-in flow control to control the extension speed of double-acting hydraulic cylinder, I've made a 6-minute video of a simulated model. It's explosive. Watch it HERE

If you enjoyed this article, you'll love Brendan Casey's Inside Hydraulics newsletter. It gives you real-life, how-to-do-it, nuts-and-bolts, hydraulics know-how – information you can use today. Listen to what a few of his subscribers have to say:

Can't Put It Down
“I get magazines and e-mails like this all the time. I never find time to read them. I decided to read Issue #30 and I couldn't put it down. I'll make time from now on.”

Richard A. Shade, CFPS
Project Engineer (Hydraulic Design)
JLG Industries Inc.

So Valuable It Earned Me A Raise
“The knowledge I've gained from this newsletter has been so valuable it has earned me a raise!”

Jack Bergstrom
Heavy Equipment Mechanic
Sharpe Equipment Inc.

Love It - Keep Them Coming
“I just love this newsletter. As a Hydraulics Instructor for Eaton, I make copies and distribute them to my students as I address various topics... Keep 'em coming.”

Michael S Lawrence
Hydraulics Instructor
Eaton Hydraulics Inc.

Here's a sample of what's covered in this powerful newsletter: troubleshooting, contamination control, component repair and testing, preventative maintenance, failure analysis, and much, much more!

To get a FREE subscription to the Inside Hydraulics newsletter, fill out this form - don't forget to capitalize the first letter of your name - and hit 'SUBSCRIBE NOW!'

First Name *
Email *

This is a private mailing list that will never be sold or given away for any reason.
You can also unsubscribe at anytime.


[Home]


Copyright © 2002 - 2013 Brendan Casey; Insider Secrets to Hydraulics